1. Firmware Samsung Galaxy S2 Gt I9100 Indonesia Tanpa
2. Firmware Samsung Galaxy S2 Gt I9100 Indonesia Terbaru
3. Samsung Galaxy S2
4. Samsung I9100 Galaxy S Ii

Samsung Stock Rom XSE/Bahasa Indonesia. Samsung Galaxy S2 GT-I9100 Jelly Bean Samsung Galaxy S2 GT-I9100G. Untuk mempermudah download silahkan daftar Ziddu disini Firmware Samsung Galaxy Packet GT-S5300. Download Download firmware samsung s2 indonesia firmware galaxy y terbaru indonesia dxma1download from 4shared download at 4shared. Download Samsung Galaxy S2 GT I9100 firmware (Stock ROM), flash it in your device using Odin Tool and enjoy the native Android experience again.

Finally, I have my Singapore local set, Samsung Galaxy S II updated with the official firmware from Samsung. Rather than waiting for the official roll out of the firmware via Kies, I have obtained the packaged version and updated my set to the new Gingerbread 2.3.5 version. Below is the full instructions for the firmware upgrade.

These are the files which you will need:

a) Samsung USB Drivers
b) I9100XXKI3.rar (specify the Password – samfirmware.com)

Phase 1- Preparation

1) Install the Samsung USB drivers

2) Unzip the main firmware file which will contain 5 files

CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,

GT-I9100-CSC-MULTI-OXAKI3.tar.md5

MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5

Odin3 v1.83.exe

u1_02_20110310_emmc_EXT4.pit

3) Run Odin3 v1.85.exe file

4) Power off your Galaxy S2

Phase 2 – Upgrading and Updating

5) Hold Volume down key+ Home button key and press power on

6) Phone in download mode

7) Connect your phone with USB cable. and you should get the message “Added! !” under the Odin’s message box in the bottom left.

8) In the Odin application, check only Re partition, Auto reboot & F. Reset time in option

9) Specify files in Odin:

Firmware Samsung Galaxy S2 Gt I9100 Indonesia Tanpa

PIT = u1_02_20110310_emmc_EXT4.pit,

PDA = CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5,

PHONE= MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5,

CSC = GT-I9100-CSC-MULTI-OXAKI3.tar.md5

10) Hit the start button and process will begin

11) Wait until your phone gets restart and then unplug the cable

Now your Samsung Galaxy S2 will be updated to I9100XXKI3 Android 2.3.5.

Special notes:

– Take Backup of your contacts messages and other data from your phone

– This procedure doesn`t format your internal memory. But messages, contacts and apps WILL be erased

– Shut down Samsung Kies completely prior the start of the upgrade

– This is not a root process and thus the warranty is not voided

Disclaimer : This post is for education purposes and although this process is tested to be successful on a Samsung S II, you may proceed with the steps at your own risks.

Read other related posts:

Share this article on:

Firmware Samsung Galaxy S2 Gt I9100 Indonesia Terbaru

Follow us on:

Samsung Galaxy S2 is one of the best devices of Samsung’s S series. It’s been years since the device release date. So, Samsung has officially stopped the software updates for Galaxy S2. So, if you wish to install latest Android 8.0 Oreo on Galaxy S2, you can use custom developed ROMs.

LineageOS is one of the best custom firmware available for Galaxy S2 to update Android 8.0 Oreo. It is reliable and good at performance as it is based on Stock Android. Currently, LineageOS 15 is in Alpha version. So, if you are not a technical person, this update guide is not for you. The ROM may contains bugs and is unstable. We recommend, not to install this ROM for daily use. You can follow the official ROM page link provided at end of article for updates on bug fixes and stable release. If you wish to update Samsung Galaxy S2 I9100 to Android 8.0 Oreo, do follow the below prerequisites to safeguard your personal data and to ensure successful installation.

PREREQUISITES

Check Device Model Number

It is vital to check device model number before rooting/unlocking/flashing process to ensure flashing compatible files on the device. The device model name/number should be Samsung Galaxy S2 GT-I9100. If your device model number doesn’t match with mentioned one in the link, do not attempt the tutorial.

Samsung Galaxy S2 USB Drivers

To transfer firmware packages, it is to be connected with PC. For the PC to detect the device, it should have installed Samsung USB drivers. If you’ve not installed previously, download them form below source and install manually.

Samsung Galaxy S2

Steps To Be Considered

• Enable USB debugging on the Samsung Galaxy S2 which lets the device establish a stable connection with computer via USB. You can do it by following the below mentioned path. In latest versions of Android, the Enable Debugging option will be hidden in depth of settings panel. You can follow our guide to enable USB debugging.
• Rooting the device erase entire data on the device including internal SD card. So, make sure you create a backup of entire important data. If you are not familiar with Android backup process, you can refer our guide to Backup Android phone data.
• Make sure the phone’s battery is at least 60% charged at the start up of tutorial. If battery runs off during unlocking process, it may turn your phone into brick. So, charge the device before tutorial.
• If the device bootloader is locked, it is to be unlocked before rooting process. You cannot gain root access unless bootloader is unlocked.
• To install custom ROM’s/Firmware the Galaxy S2 must be rooted and should be installed with Clockworkmod recovery/TWRP recovery. Perform this step if not done previously.

Are you sure you completed all the above steps? Yes, you can now get started with the Android Oreo installation process.

DOWNLOADS SECTION

GUIDE TO UPDATE SAMSUNG GALAXY S2 I9100 TO ANDROID 8.0 OREO VIA LINEAGEOS ROM

Disclaimer: Rooting/Unlocking/Installing custom ROMs and Kernels are not official methods. So, neither device manufacturer nor Droid Word team is responsible if anything goes wrong with your device during the process. This article is only for educational purpose. You can continue with the implementation at your own risk.

STEPS TO BE FOLLOWED

Step 1: Download Android 8.0 Oreo ROM and Google Apps packages from downloads section to your PC. Do not unzip the packages.

Step 2: Connect Samsung Galaxy S2 to PC using an USB cable.

Step 3: Transfer the downloaded packages into the root of phone/SDcard memory.

Step 4: Once the transfer is done, disconnect the USB and turn off the Galaxy S2.

Step 5: Enter custom recovery mode on Galaxy S2. Don’t know how? Do follow the simple step below.

Turn on the device by holding Volume up+Home+Power buttons together until you see the recovery mode.

Step 6: In custom recovery mode, you can view a list of options which are not available in Stock recovery. Among them, find and select wipe data/factory reset(In recovery mode the touch interface will not work. You can use Volume buttons to navigate and Power button to select).

Step 7: Now perform a complete data wipe by selecting wipe cache partition.

Step 8: Once done, enter advanced options in recovery mode and select wipe dalvik cache.

Step 9: If you are done with all the above steps, you can flash the firmware package now. Select install zip from sdcard, navigate and choose the previously copied Android 8.0 Oreo ROM package. Confirm the installation and do not interrupt the process.

Step 10: After completion follow Step 9 again and choose Google apps package in this case.

Step 11: Once the packages installation is completed, select reboot system now option.

That’s it! Your device now boots up running Android 8.0 Oreo. You have successfully updated Samsung Galaxy S2 I9100 to Android 8.0 Oreo operating system. If you face any issues while following the above guide, do let us know through the comments section. We may help you out.

Samsung I9100 Galaxy S Ii

via-xda